Accessories
Accessories for the H1
A short list, on purpose. Each item was made for the H1 and tested with it. Prices include VAT for EU customers.
- HB-1
Battery EUR 79
Spare lithium-ion battery, 7.2 V, 2,100 mAh. The same cell the H1 ships with.
- HC-1
Dual charger EUR 69
Charges two HB-1 batteries at once over USB-C, in about 3 hours. Status shown on a small e-paper strip.
- TG-1
Thumb grip EUR 59
Machined aluminium rest that slides into the hot shoe. Graphite or Raw Aluminium.
- HCL-1
Half case EUR 119
Vegetable-tanned leather half case with a hinged base so the battery door still opens. Dark brown or black.
- ST-2
Waxed cotton strap EUR 49
112 cm, with leather ends and split rings. Included with the H1; sold separately in black, olive and sand.
- WS-1
Wrist strap EUR 35
Braided 8 mm cord, 26 cm loop, attaches to either strap lug.
- LH-40
Screw-in hood for 40 mm EUR 45
Short vented hood for the 39 mm filter thread, with its own slip-on cap.
- SR-1
Soft release button EUR 19
Concave brass button that screws into the shutter release. Black or brass.
- HV-M
M-mount adapter EUR 249
For M and, with a ring, M39 lenses. Reads six-bit codes. See the compatibility article.
- BC-1
Body cap EUR 25
Replacement body cap in machined aluminium with a vented centre.
Good to know
The H1 accepts filters only through its lenses. The LH-28 and LH-75 hoods ship with their lenses and are also sold on their own as spare parts for EUR 49 each; write to us for spare parts not listed here.
The H1 has no built-in flash. Any flash with a single centre contact fires from the hot shoe; TTL is not supported.
Spare batteries have their own shipping rules. See shipping and delivery before ordering an HB-1 on its own.